>  CALL US
01483 791 452 

You have 0 items
Total: £0.00

10% off Drive Grip

Garage floor sealed with Prime 'n' Seal

Click on image to zoom

More Views
  • Garage floor sealed with Prime 'n' Seal
  • Prime 'n' Seal Before
  • Prime 'n' Seal After
  • Prime 'n' Seal

Prime 'n' Seal 2.5L, CLEAR

Prime 'n' Seal both primes and seals dusty old concrete floors prior to painting them, saving you time and money as well as giving you a great floor

  Coverage alt15m² per 2.5L

SKU# FPE-F403504

2.5L from £35.00  (INCL. VAT)
Add Items to Cart
Description
This isn't any normal concrete primer; this not only primes dusty old concrete, it seals it too. This two-pack epoxy resin penetrates into the concrete and binds it together giving you a good surface on which to paint. We recommend our own quality paint range to complete the job; Garacoat Garage Floor Paint, because it too is a epoxy resin paint.

Another benefit of Prime'n'Seal is that it dries quickly (typically in 4-6 hours at temperatures above 15°C and with good ventilation) too. So priming, sealing and painting with Garacoat can easily be done in one day or over a weekend
Although Prime’n’Seal is designed for use with our Garacoat or Easicoat, you can apply other water based paints after only 4-6 hours. If you are applying someone elses oil based paint, you’ll have to leave the Prime ‘n’Seal for 3 or 4 days.

Coverage: 15m² (150sq ft) per 2.5 litres (1/2 gallon) per coat, depending on porosity
Technical Specs
Delivery Time (Days) 01-Mar
Coverage 15m° (150sq ft) per 2.5 litres per coat, depending on porosity
Application - Drying time (hours) 4-6 hours under normal temperatures (15°C) with decent ventilation
Application - Recommended Coats 1
Preparation & Application
Prepare It
Ensure that surfaces are clean and free from loose materials. Surfaces should be as dry as possible, although a little moisture isn’t a problem.

Concrete, masonry and sand/cement screeds
Often a good vacuum cleaning is all you need to prepare the surface. Clean It should be used to remove oil, grease and dirt. If the grease or oil deposits are heavy then use Clean It undiluted. Don’t wet any porous surfaces or they will absorb moisture and this will stop Prime ‘n’ Seal penetrating correctly. If you do have to wash the surface, please make sure it is given time to thoroughly dry out.

New concrete
Surfaces must be left for 2 weeks. Any laitance (a dusty residue of cement particles) can be removed with a good stiff brush.

Apply It

The unit consists of a tin of curing agent and a tin of resin. Stir the contents of each tin and then empty the small tin into the larger tin. Stir again thoroughly and use immediately. (You now have 1 – 2 hours to apply it). You can apply using a brush or medium pile roller, working it thoroughly into the surface. The sealer should be applied in warm, dry, well ventilated conditions, ideally between 15-25deg;C. Lower temperatures will greatly increase the drying time.

Dries in 4-6 hours under normal temperatures (15°C) with decent ventilation.
Reviews

Quick Overview

Prime 'n' Seal both primes and seals dusty old concrete floors prior to painting them, saving you time and money as well as giving you a great floor



  Coverage alt15m² per 2.5L


You may also need:

  • 9" Roller & Tray with spare roller

    9" Roller & Tray with spare roller

    Starting at: £8.80  (INCL. VAT)

  • Garacoat Garage Floor Paint 2.5L & 5L

    Garacoat Garage Floor Paint 2.5L & 5L

    £39.00  (INCL. VAT)
  • Paint Brush 5"

    Paint Brush 5"

    £5.50  (INCL. VAT)