Close

Incoming Message

You have 0 items
Total: £0.00

Patch It Rapid Floor Repair

More Views

  • Patch It Rapid Floor Repair
  • Before Patch It
  • After Patch It
  • Patch  It Rapid Floor Repair Tub

Patch It Rapid Floor Repair 10KG

On the whole you don't want holes in your concrete as they can be dangerous and tend to have a nasty habit of getting bigger. So, fill them swiftly with this repair patch that you simply pour in and leave to set. Holes? What holes?

  Coverage alt0.2m² per 10kg at 25mm deep

SKU# FPE-A070703

10kg from £28.50  (INCL. VAT)
Add Items to Cart
Description
Fix big holes in your driveway or garage floor with this easy-to-use and effective product that you simply mix and then pour into the offending hole. Level it off with a trowel and job done. For a really professional finish, Patch It can be feather-edged (tapered) which will help prevent anyone tripping on the edges of the hole. It sets so quickly you can drive your car over it two hours later under normal temperature conditions.

Because it sets so quickly, the workable life of the product is only about 10 minutes before it starts to set. Please don't let this put you off though as, let's face it, it only takes a couple of minutes to pour Patch It into the hole and smooth it over.

However, here are some tips to give you the maximum time to fill that hole before the product sets:

Firstly, do all your prep first in terms of brushing out any loose material in the hole.

Secondly, mix the mixture at the hole not at the tap you are drawing the water from. In other words, carry the water to the hole and mix everything up there.

Thirdly, have a bucket of water handy to put your tools in so that the mixture doesn't set on them, as it will be impossible to remove once set.

Lastly, only mix as much Patch It as you need. The product has a long shelf life and you can always store it until you next need it. Equally, when your friends see how good it is at filling holes they may well ask you to give them any leftover quantity!

Coverage approx. 0.2m² ( 0.66 sq ft) per 10kg (22lb) at a thickness of 25mm (1")

Trade Secrets
You can apply Patch It Rapid Floor Repair in damp conditions as well as dry.

Quick Link to Safety Data Sheet

Safety Data sheet
Technical Specs
Delivery Time (Days) Standard
Primer Required no
Usage - indoor / outdoor interior and exterior
Usage - Properties Concrete repair product that is simply poured into the hole to fill it quickly and permanently
Usage - Surfaces Worn, rough and holed concrete in floors, patios, driveways, paths
Max Operational Temp (deg C) 60
Coverage 0.2m² for 10kg at a thickness of 25mm,
Application - Curing Time (hours) 1 hour for foot traffic, 2 hours for vehicles at 15-20°C
Application - Pot Time (hours) .01 hours at 20°C
PREPARATION &
APPLICATION
Prepare It
Ensure the area to be repaired is free from oil and detritus, by brushing the area with a wire brush. Oil can be removed using Clean It Floor Degreaser.
The surface to be treated can be damp, but not wet.

Repair It
Add water to the mixture slowly – 1kg of mixture to approximately 175-225ml of water – and mix with a spatula or similar to reduce air bubbles. Pour it in the hole and level things off with a float.

Do not re-stir as this may weaken the final repair.

The mixture sets very quickly, so only mix what you need – the rest can be stored for future use.

Patch It sets to a light grey colour.

Quick Overview

On the whole you don't want holes in your concrete as they can be dangerous and tend to have a nasty habit of getting bigger. So, fill them swiftly with this repair patch that you simply pour in and leave to set. Holes? What holes?



  Coverage alt0.2m² per 10kg at 25mm deep


You may also need: