>  CALL US
01483 791 452 

You have 0 items
Total: £0.00

10% off Drive Grip

Mark It Line Marking Paint application

More Views
  • Mark It Line Marking Paint application
  • Mark It Line Marking Paint

Available Colours

White Yellow

Mark It Line Marking Paint

If you need to paint lines on concrete or tarmac this is what you need. Use this wherever you want to have lines highlighted for informational or safety purposes, such as a dangerous step or an area of your property where you don't want people to park

  Coverage alt15m² per 25KG

SKU# FPE001

2.5L from £22.00  (INCL. VAT)
Add Items to Cart

* Required Fields

Description

There are many different reasons for painting lines on or around your property. For example, you may want to stop people parking outside your garage (you shouldn't use this paint on public property though) or use it to highlight step edges or other trip hazards. Easy to apply to concrete, or tarmac with a roller or a brush.

This paint is made with chlorinated rubber, which makes it really tough, long lasting and fade resistant. Shower proof in just one 1 hour, one coat is usually enough.

If the surface to which you are applying Mark It Line Marking Paint is greasy then we recommend you treat with Clean it Floor Degreaser.


Coverage: 2.5 Litres will give you approximately 125 to 150 metres of lines at a line width of 50mm. This is between 6 – 7.5 m² per pack.
Shelf Life: 12 months minimum under normal conditions.

Trade Secret

That just leaves the question of how you get your lines straight. Take a roll of masking tape and stick one end to the ground, keeping it firmly in place by putting a brick or similar heavy object on the end. Walk backwards slowly unrolling the tape until you have walked the length of the line you want to paint. Stick down the end you are holding, place your foot on it and cut the tape. Repeat the exercise with a parallel piece of tape whose width from the first piece of tape is the width of the line you want to paint. Paint your line and when the paint has dried remove both pieces of masking tape.

Technical Specs
Appearance matt
Delivery Time (Days) standard
Primer Required No
Usage - indoor / outdoor Indoor and outdoor
Usage - Suitable for painting lines to indicate demarcation or to highlight a hazard
Usage - Properties easy to apply, hard wearing paint that is quick drying yet long lasting
Usage - Surfaces roads, floors, steps
Max Operational Temp (deg C) 60
Coverage approximately 125 -150 metres of 50mm wide line per tin
Application - Drying time (hours) touch dry in 40 minutes at 10°C, 90 minutes at 0°C
Application - Recommended Coats 1
Preparation & Application
Prepare It
Surfaces should be clean, dry and free from debris. Grease or oil stains should be removed with Clean It Floor Degreaser.

Apply It
Do not stir, apply with a brush or roller. Keep the lid on the tin to ensure the paint doesn’t dry out.

Clean It
Use a thinner and cleaner based on a Xylene solvent.

Store It
This product is highly flammable with a flashpoint below 21°C. Store in a cool and dry place that is well ventilated.

We have made every effort to display the colours of the products as accurately as electronic media will allow. However, if colour is imperative to the finished job please contact us for a free sample to trial on the actual surface.
Reviews

Quick Overview

If you need to paint lines on concrete or tarmac this is what you need. Use this wherever you want to have lines highlighted for informational or safety purposes, such as a dangerous step or an area of your property where you don't want people to park



  Coverage alt15m² per 25KG

You may also need:

  • Paint Brush 5"

    Paint Brush 5"

    £5.50  (INCL. VAT)
  • Stiff Broom 12"

    Stiff Broom 12"

    £8.80  (INCL. VAT)
  • Paint Brush 2"

    Paint Brush 2"

    £3.80  (INCL. VAT)