>  CALL US
01483 791 452 

You have 0 items
Total: £0.00

10% off Drive Grip

Firmtread Anti Slip Self Adhesive Treads

More Views
  • Firmtread Anti Slip Self Adhesive Treads
  • Firmtread Anti Slip Self Adhesive Treads
  • Firmtread Anti Slip Self Adhesive Treads
  • Firmtread Anti Slip Self Adhesive Treads

Firmtreads - BLACK Pack Of 5 - Anti Slip Treads

These easy to fit self adhesive pads will create an anti slip surface on stairs and other potential trip hazards, inside and outside. They look great too so won't spoil the look of any surfaces that you may use them on.

SKU# FPE-C190206

Pk 5 from £29.00  (INCL. VAT)
Add Items to Cart
Description
When you need extra grip on a slippery step, flagstone or similar then Firmtread Anti Slip Self Adhesive Treads will do the trick.

Our treads have a tough, resin-bonded aluminium oxide provides a long lasting, gritty finish and a water resistant pressure sensitive adhesive backing. These treads are water resistant and will stick to most non-porous surfaces, such as varnished wood. They are suitable for use in and outdoors. Customers tell us they use them in very diverse settings - from cellars to attics, even on boats where slipping could be very dangerous, of course.

If you are planning to use these on a step or flagstone that is damaged then we recommend that you treat with Permafix Concrete Repair and level off prior to fitting. However, if the steps are merely worn by years of use then don't worry, as the treads can be snugly fitted into the contours as they are very flexible.

Do use our Firmtread Tapes Edge Sealer though as this will stop water getting under the tapes and prolong their life and safety properties. You simply run it evenly along the edges of the tape like you are applying an adhesive. You don't need to apply it thickly, just an even film so water can't get in. Squeeze the tube as you would a tube of toothpaste.

Apart from that they can be used without any prior preparation beyond making sure the surface to which you are are fixing them to is clean, dry and free from loose materials and dirt, it really is that simple.

The dimension of each tread is 600mm (23.6") x 150mm (5.9") They are available in black only and are sold in packs of 5.
Technical Specs
Delivery Time (Days) Standard
Primer Required No
Width (mm) 150
Usage - indoor / outdoor Indoor and outdoor
Usage - Suitable for Brick, Concrete, Metal, Stone, Wood,
Usage - Properties Easy to apply, tough resin bonded grit on a PVC base,
Usage - Surfaces Steps ramps, walkways, paths
Max Operational Temp (deg C) 60
Preparation & Application
Prepare It
The surface that you are sticking the treads to should be clean, dry and free from dirt.

Apply It
Firstly, allow 10mm between the edge of the step and the tread to avoid undue wear. Then peel back about 50mm of the backing tape to show the adhesive underneath. The trick is to keep peeling back a little of the backing tape as you lay the treads. Firm the treads into place with either hand or foot.

If you make mistake, don’t worry, the treads can be moved into place as they take a while to set. In fact, they are not fully set for 24 hours and in a hazardous area we recommend that you don’t walk on them until they are fully set.

You’ll need
Firmstep Tapes Edge Sealer if applying to an area that is prone to wetness.
Reviews

Quick Overview

These easy to fit self adhesive pads will create an anti slip surface on stairs and other potential trip hazards, inside and outside. They look great too so won't spoil the look of any surfaces that you may use them on.

You may also need: