Fact: 50% of garage floors are of poor quality. If your concrete is weak, flaking or dusty then it will be impossible to keep clean and presents a health hazard if you breathe it in.

Dust Off Concrete Sealer is a hardener and sealer in a solvent free formula which can be easily applied with a soft broom. The way it works is that porous concrete will absorb the Dust Off and it will actually help to bind weak concrete surfaces and make them harder.

So, if your concrete is starting to erode then apply Dust Off to stop it going any further downhill. It won't reverse the process, of course, but it will stop it getting worse.

Dust Off doesn't smell so can be used anywhere. Use internally or externally and not just on concrete - it is also very effective on brick and really benefits block paving as it helps to bind the sand together making it easier to clean.

To clean the soft broom which you used to apply the Dust Off wash out in warm water.

If this is all sounding terribly simple, that is because it is. So, if you are wondering what to do about your flaky, dusty concrete then wonder no more - the answer is Dust Off.

Coverage: 30m² (322sq ft) per 5 litres (1 gallon) per coat, depending on porosity

Trade Secret

To find out whether or not you need Dust Off, take a glass of water and pour it on the concrete you are thinking of working on. If the water is absorbed into the concrete then you need Dust Off.

General
Ensure that surfaces are clean and free from loose materials. Surfaces should be as dry as possible, although a little moisture isn’t a problem.

Concrete, masonry and sand/cement screeds
Often a good vacuum cleaning is all you need to prepare the surface. Clean It Floor Degreaser should be used to remove oil, grease and dirt. If the grease or oil deposits are heavy then use Clean It undiluted. Don’t wet any porous surfaces or they will absorb moisture.

New concrete
Surfaces must be left for 2 weeks. Any laitance (a dusty residue of cement particles) can be removed with a good stiff brush.

Painted or sealed surfaces
Only apply Dust Off Concrete Sealer to sound surfaces. Treat as above to remove detritus and test a small area first.

Dust Off Concrete Sealer is easy to apply to new or old concrete surfaces.It is a liquid resin you simply brush on with a soft broom. It sinks into any porous surface leaving it hardened and dust proofed.

Remove any excess liquid with a brush or a squeegee