>  CALL US
01483 791 452 

You have 0 items
Total: £0.00

10% off Drive Grip

Block It Stain Blocking Primer

More Views
  • Block It Stain Blocking Primer
  • Block It Stain Blocking Primer Before
  • Block It Stain Blocking Primer After
  • Block It Stain Blocking Primer After

Block It Stain Blocking Primer 1L

For heavy stains from smoke damage, nicotine, water or rust use our shellac-based primer and sealer. Block It will also permanently block odours

  Coverage alt12m² per 1L

SKU# FPE-B160111

Regular Price: £18.50  (EXCL. VAT)

Special Price: £9.95  (INCL. VAT)

Add Items to Cart
Description
Block it Stain Blocking Primer; a tough white primer that covers and seals even the most stubborn stains and marks.

It handles tough stains such as nicotine, water marks, smoke, ink, grease, rust and felt tip pen. and can be applied to glossy surfaces such as glass and ceramic tiles without the need for sanding.

You can use Block it with most types of water, oil or solvent paint. It’s not just for painting on walls either, metal, plaster, uPVC, Formica, hardboard, glass and ceramic tiles are suitable surfaces too. Can be applied in freezing temperatures and dries in only 15 minutes, recoatable in 45 minutes.

Coverage approx. 12m² on smooth surfaces per 1 litre per coat.
Technical Specs
Delivery Time (Days) Standard
Primer Required No
Usage - indoor / outdoor Indoor and outdoor
Usage - Properties blocks stains from nicotine, ink, grease, smoke, soot, blocks odours
Usage - Surfaces priming prior to overcoating walls, metal, plaster, uPVC, Formica, hardboard, glass and ceramic tiles
Max Operational Temp (deg C) 60
Coverage 12m² on smooth surfaces with low porousity
Application - Drying time (hours) touch dry in 15 minutes at 20°C and an overcoat can be applied in about 45 minutes
Application - Recommended Coats 1
Min Application Temperature (deg C) 5
Preparation & Application
Prepare It
All surfaces should be clean, dry and free from dust, oil, grease and adhesives. Any cracks should be filled.

Exposed wood should be lightly sanded to remove any mould or similar.

Rusty surfaces need to be sanded before application.

Apply It
Apply with a brush or roller at temperatures above 5°C. Do not spray. Stir well before using, do not thin and do not let paint drip or run.

One coat is normally sufficient, though a second coat is sometimes needed on porous surfaces.
Reviews

Quick Overview

For heavy stains from smoke damage, nicotine, water or rust use our shellac-based primer and sealer. Block It will also permanently block odours



  Coverage alt12m² per 1L


You may also need:

  • Damp Stop 3 in 1 Damp Treatment 5L

    Damp Stop 3 in 1 Damp Treatment 5L

    £69.50  (INCL. VAT)
  • 9" Roller & Tray with spare roller

    9" Roller & Tray with spare roller

    Starting at: £8.80  (INCL. VAT)